What You Need to Know About Installing a 4-Inch Lift Kit on Your Toyota Tundra

Is your Toyota Tundra too low to the ground? You need a reliable 4-inch lift kit to give it the extra height you desire.

Learn about the essential parts you need for installation and get tips to get everything up and running!

The Toyota Tundra is a great 4×4 pick-up truck that can handle any terrain with ease. However, if you want to take your Tundra’s off-roading capabilities to the extreme, then you should consider installing a 4-inch lift kit.

A lift kit will give your truck extra ground clearance and better maneuverability in rough terrain. It also adds some cool style to the exterior of your truck.

In this guide, we’ll cover the key things you need to know before installing a 4-inch lift kit on your Toyota Tundra. We’ll discuss the pros and cons of lifting your truck, what type of kit is best for your needs, and how to install it correctly. We’ll also give you some tips on how to maintain your lifted Toyota Tundra so it runs smoothly and safely for years to come.

Explanation of a 4-Inch Lift Kit

A four-inch lift kit is an aftermarket modification that can be installed on a Toyota Tundra to increase the truck’s ground clearance for more off-roading adventures. The increased clearance is achieved with strut spacers, extended shocks, and higher-quality suspension components. The custom installation of these parts can last up to 10 years, depending on the regular maintenance and use of the Truck.

The 4-inch lift kits will provide your vehicle with 3 -5 inches of extra ground clearance, lifting your truck from the factory height setting. It will allow for better handling of uneven terrain and provide extra space for upgrades such as larger tires and wheels or a snorkel system. Installing a 4-inch lift kit requires some knowledge of technical tools and mechanical experience, although it’s not overly labor intensive.

When installing a 4 inch lift kit to your Toyota Tundra you should note that there are many different companies that offer both leading edge and budget 4 inch lifts kits online. You want to make sure you purchase the right one specific to your make/model before starting the installation process as some may not actually fit properly or provide all of the protocols required for the proper installation process. Additionally it is commonplace to require at least basic mechanical understanding when undertaking this type of task having access to a jack stands/wood blocks & jack will also greatly assist in areas like raising & lowering vehicle safely during installation process. It’s important before starting out that you read through any product manuals for both hardware components being used as well as recommendations given by manufacturer as some vehicles may require additional steps due to their specific design requirements when installing a four inch lift kit properly.

Importance of installing a lift kit on a Toyota Tundra

Installing a 4-inch lift kit on a Toyota Tundra is important for a number of reasons.

First and foremost, it gives the vehicle more ground clearance. This translates to better off-roading performance, as you’ll be able to more easily overcome obstacles on any given terrain.

Secondly, the combination of increased ride height and larger tires will result in an improved suspension response and improved stability when cornering and driving over rough patches of road.

Additionally, it’s also possible to increase the maximum weight capacity of your Tundra by installing a lift kit, which is especially important depending on how you plan to use your vehicle (camping trips, hauling supplies etc).

Finally, installing a lift kit also gives your Tundra a much more aggressive look; after all, nothing says “power” like giant wheels and wider stance!

Preparing for Installation

Before you jump into the installation of your 4-inch lift kit for your Toyota Tundra, it is important to take the time to plan and prepare for the process. In this portion of our guide, we’ll review the steps you need to follow before beginning installation.

Safety Precautions: Wear protective gear and ensure your lift is stable before getting started. Always keep small items out of reach as they can become projectiles if you’re not careful. Familiarize yourself with industry best practices when operating equipment specific to car lifts or manipulations at height.

Tools and Supplies: Make sure all necessary tools are on hand before beginning installation including a socket wrench set, torque wrench, jack stands (one per side), an adjustable wrench set, electrical tape, a measuring tape, driving gloves and shop towels. You should also have 4-inch lift kit components ready including shocks or struts, mounting spacers, U-bolts/brackets and everything needed to attach them as required in the manufacturer instructions.

Installation Space: Clear a workspace that is free of debris and distractions allowing plenty of room for you to move around your vehicle safely while building it up over several hours or days depending on its condition. Allow space behind the tires so blocks can be placed snugly against the ground after installation is complete later if needed. Also secure extensions poles over 20 feet high against potential tipping by anchoring their bases in cement or other heavy materials with weather protection bags on top for added security during any wet conditions.

Tools needed for installation

Before you can begin the installation, you’ll need to make sure you have the appropriate tools on hand. Having the right tools in your toolbox can help reduce time wasted looking for something specific and ensure a successful result.

When installing a 4-inch lift kit on your Toyota Tundra, the following tools may be necessary: socket wrenches (metric or standard), pliers (channel-lock or needle-nose), torque wrench, hammer, impact gun and sockets (torque extension is helpful but not required). It is also useful to have a specialty lift kit toolbox that includes items such as pry bars, ratchets, wrenches, and other handy tools for lifting. Many kits also include items such as anti-sway bar end links and brackets.

In some cases it might be necessary to puncture the cardboard box in order to gain access to certain components. When cutting through the cardboard remember to use safety goggles or a face shield and gloves for protection from flying debris. Additionally, ensure it is done away from other work being completed as loose material might damage surrounding objects.

Preparing the Toyota Tundra for installation

Installing a 4-inch lift kit can give your Toyota Tundra a whole new look and improved off-road capabilities. To ensure the installation process is smooth and successful, the following steps should be taken to properly prepare the Tundra for installation.

Before getting started, it is important to read through all of the instructions included with the kit to familiarize yourself with what you will be doing during each step of the installation process. Additionally, make sure that you have a copy of your vehicle’s manual as well as any necessary tools.

It is also highly recommended that you take pictures of every step during the process; this will help when it comes time to put everything back together after taking apart various components. Lastly, be sure that you have all necessary replacement parts before starting. These are typically supplied with a 4-inch lift kit including shock absorbers, springs and body lift spacer blocks.The Toyota Tundra Gets a TRD Lift Kit That Isn't Compatible With Any TRD Model

Safety precautions

Safety is always a top priority when working on vehicles, and installing a 4-inch lift kit on your Toyota Tundra is no exception. Before beginning your installation, it’s important to review the following safety precautions:

  1. Carefully read all instructions provided with the lift kit and be familiar with the general design of your vehicle’s suspension system before beginning the installation.
  2. Wear eye protection and heavy-duty gloves throughout the procedure to protect against injury from sharp edges or small parts.
  3. Support the vehicle securely by using jack stands for additional safety before starting any work.
  4. Make sure all hardware components such as nuts, bolts, and washers are in place before installing any lift kit parts.
  5. Tighten all hardware correctly—under torqueing could cause damage to parts, while over-torquing could cause hardware to become stripped or break.
  6. Always inspect finished work areas for any loose connections or incorrect connections that may hinder performance or cause further damage after installation is complete.

III. Benefits of Installing a 4-Inch Lift Kit

Installing a 4-inch lift kit on your Toyota Tundra can provide several benefits, including improved ground clearance, increased off-road capability, additional tire and suspension options, better towing capacity and improved looks.

Installing the lift kit will help to improve the ground clearance of your vehicle, allowing you to navigate rough terrain while reducing the likelihood of bottoming out. Additionally, increasing the height of your vehicle by 4 inches can provide significantly enhanced off-road ability. The larger tires and additional ground clearance allow you to traverse obstacles more easily. Furthermore, depending on your vehicle setup and goals, you may need additional suspension components such as control arms or leaf springs. Installing a 4-inch lift kit offers these options for optimization.

Another benefit is improved towing capacity—with larger tires providing greater traction and durability. This can be beneficial for recreational off-roading as well as light duty hauling applications that don’t require heavy commercial trailers or RVs. Lastly, a 4-inch lift can add an aggressive look to your ride that may appeal to some drivers who want an enhanced aesthetic with their functional benefits.

Improved off-road capabilities

Installing a 4-inch lift kit on a Toyota Tundra will give you improved off-road capabilities for tackling challenging terrain. It will also help to increase the ground clearance, allowing for better maneuverability and improved riding comfort. Additionally, it can also provide room for larger tires, giving you even more flexibility when it comes to taking your Tundra out in the wild.

Installing a 4-inch lift kit requires careful attention to detail and knowledge of the Tundra’s suspension to ensure that the system is installed properly. The job requires the ability to test fit components for clearance, alignment adjustments, and welding of some parts in order to secure them in place. The installation of new components such as shock absorbers, track bars and link arms should also be taken into consideration prior to starting the project.

Additional modifications may be necessary depending on how high your truck is raised by the new lift kit — this includes rear track rust repair as well as upgrading your vehicles braking system. If you plan on driving your vehicle in extreme conditions or over large bumps regular alignment checks should be performed upon completion of the installation process in order to ensure proper suspension set up and handling performance.

Increased ground clearance

Installing a 4-inch lift kit on your Toyota Tundra will create increased ground clearance, allowing you to navigate harsher terrains. As you raise the truck, the angle of approach and angle of departure from the road are both increased significantly, raising your minimum ground clearance up to more than 10 inches. Not only is this beneficial for driving off-road but it can also provide additional protection when traversing flooded roads or driving in rocky terrain.

Additionally, lifting your truck will provide additional space underneath for installing crawler gears and other off-road upgrades. With increased ground clearance, larger tires can be installed and these will help with improved performance in rock crawling and other types of terrain that require traction. Finally, achieving a higher ride height can have an aesthetic component as well — lifted trucks tend to look more imposing on the street or off-road.

Enhanced vehicle appearance

Installing a 4-inch lift kit can significantly enhance the appearance of your Toyota Tundra. Not only does it give your truck a much more aggressive look, but it also helps to show off larger tires, which can make your vehicle stand out from the crowd even more. When you install a 4-inch lift kit, you’ll dramatically improve the handling and performance of your vehicle by reducing body roll and giving you greater control on the road. Plus, since it will raise the center of gravity higher above the road surface, you’ll enjoy improved ride comfort.

In addition to improving ride comfort and performance, installing a 4-inch lift kit also makes for easier access to various parts of your vehicle. This makes servicing and maintenance easier too! Lastly, if you ever need to tow or haul large cargo items such as tools or building materials, then this could be an ideal solution. With a higher ground clearance afforded by this type of lift kit, you will be able to move such items with ease — just make sure that all hitch hardware is properly tightened before any loading takes place.Installing 3.5-inch Lift Kit 2022 Toyota Tundra TRD 4x4 - YouTube


Finally, it’s important to remember that a 4-inch lift kit is a significant investment. It can provide your Tundra with improved off-road capabilities, but only if you do it right. Make sure you have all the necessary parts and are prepared to follow the installation instructions carefully before beginning the process. Once installed, be sure to check all your connections and monitor any noise or other signs of wear or tear from time-to-time.

A 4-inch lift kit may seem intimidating at first, but if you take your time and approach the project with patience, it’s an excellent upgrade for your Toyota Tundra truck. With a quality lift kit installed correctly, you can enjoy improved performance for many years of off-road fun!


How long does it take to install a 4 lift kit?

It can take anywhere from 4-8 hours to install a 4 lift kit.

How much does it cost to install a lift kit on a tundra?

The cost of installing a lift kit on a Tundra can vary depending on the type of kit and the labor costs, but it can range from $1,000 to $5,000.

Does Toyota install lift kits for Tundra?

Yes, Toyota offers TRD lift kits for the Tundra that can be installed at a dealership.

What should you replace when installing lift kit?

When installing a lift kit, it is recommended to replace the shocks, struts, and other suspension components to ensure proper performance and safety.

What is the disadvantage of a 4 post lift?

The disadvantage of a 4 post lift is that it takes up more space than other types of lifts and can be more expensive.

What are the disadvantages of a lift kit?

The disadvantages of a lift kit can include decreased fuel efficiency, increased wear and tear on suspension components, and a higher center of gravity that can affect handling.

Does a lift kit affect 4×4?

Yes, a lift kit can affect the performance of a 4×4 by changing the suspension geometry and altering the vehicle’s center of gravity.

Is it safe to install lift kit?

If installed properly and with the right components, a lift kit can be safe. However, it is important to have it installed by a professional and to follow all manufacturer guidelines.

What is included in a TRD lift kit?

A TRD lift kit typically includes new shocks, springs, and other suspension components to increase ground clearance and improve off-road performance.

What are common faults with lifts?

Common faults with lifts can include leaks in hydraulic systems, worn or damaged cables, and issues with the lift’s electrical components.

See Also-

Leave a Comment